Enercon Technologies

 

Enercon Technologies is a fully integrated Design and Build Center for medical device, life sciences, and electronics companies who demand high integrity electronics and reliable product performance.

Founded in 1980, Enercon Technologies has been in business for almost 40 years. In a business climate in which mergers, acquisitions, and the resulting fractures in process, data sharing, and communication are the rule, Enercon offers consistency of leadership, vision, and process. We are a fully independent, privately-held business, structured to ensure that the team assigned to your project will be there from inception to completion – through the entire lifecycle of your project.

The teams at the Enercon Design + Build Center are completely integrated and work hand-in-glove. We bring efficiency, expertise, industry knowledge and experience, and the benefit of design and manufacturing processes honed and perfected over almost 40 years to every project and to every customer.

At Enercon, integrity is everything – from the Design + Build Center itself to the products we bring to market, the processes that guide our work and the ways we treat our employees and our customers.

Enercon Technologies
Nov 16, 2018
Full time
The Senior Embedded Firmware Engineer is responsible for developing software for a diverse array of products and applications in the industrial, medical, automotive and military markets. Enercon is looking for an experienced, self-directed Software Engineer, capable of working independently or as part of a team, prepared to take on the challenge of working on dynamic and diverse projects. The right candidate will have at least 10 years of experience working on embedded products using industry standard best practices for software development. Job Requirements Excellent C/C++ for embedded systems development is a must. Programming for both Bare Metal and multi-threaded RTOS systems. In-depth knowledge of ARM and PIC processors.  DSP and FPGA experience a plus. Strong experience developing for real-time systems, low-level drivers and hardware interfaces. Experience with the following communication interfaces:  I2C, SPI, CAN, USB.  Experience with TCP/IP, WiFi, Bluetooth a plus. Knowledge and experience with lab equipment:  Oscilloscopes, power supplies, multi-meters. Experience managing source code through a Git source control system. Excellent written and oral communication skills. Good time-management skills with the ability to multi-task and work on multiple projects. Demonstrated ability to follow Software Development Plan guidance and processes so as to generate code, technical software descriptions, and other artifacts as required by the software development processes. Ability to work cooperatively with other developers, hardware engineers and testers in the development of the system. Ability to occasionally act as software technical lead for projects. Educational Requirements A minimum of a Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science or related degree is required for this position Minimum of 10 years developing software for embedded systems. Benefits Enercon Technologies offers a competitive Benefits Package.
Enercon Technologies
Nov 16, 2018
Full time
Have a leading role in design, test and troubleshooting electronic circuitry and embedded software to produce new products for Enercon and its customers. Functions & Responsibilities: Design and develop electronic schematics related to the design of complex products. Generate and test electronic designs to verify designs meet product specifications. Develop designs that promote manufacturability and testability. Develop product specifications based on requirements and identify risk areas and potential improvements. Determine the best design and development approach based on performance, cost and resources. Write original embedded software to support the hardware to meet requirements. Work with the design team to promote and establish good working practices. Perform technical evaluations of new business opportunities in support of sales and marketing. Conduct effective design reviews to produce the best design solutions. Leadership in training and guiding junior engineers. Job Requirements Strong electronic design abilities using advanced analog and digital components to create designs based on product specifications. Ability to troubleshoot PCBs to the component level. Good embedded programming skills using a higher level language such as C. Working knowledge of regulatory requirements that may affect the design such as UL and IEC. Ability to develop schematics using a CAD package such as PADS. Familiarity with test methodologies within a manufacturing environment. Familiar with SMT technology and standard design and manufacturing techniques for printed circuit boards. Ability to follow established design procedures during the development cycle and document the design to Enercon’s standards. Must possess good interpersonal skills and have the ability to work between multiple departments in carrying out this position’s duties. Provide project and technical leadership under the direction of Sr. Management. Educational Requirements Minimum of a Bachelor’s degree in Electrical Engineering or related degree Minimum of 10 years designing and testing electronic circuitry. Benefits Enercon Technologies offers a competitive Benefits Package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of the Soldering Specialist position is to solder surface mount and through-hole components onto or into printed circuit boards. Follow written processes and/or rework instructions to complete product through the soldering stage of manufacturing. Solder surface mount components (Fine pitch, SOIC, etc.). Solder through-hole components. Perform visual inspection of PCB’s for IPC-A-610 workmanship requirements. Maintain appropriate work related paperwork. Move material/product to different operations as required. Follow all established ESD, safety, ergonomic and security policies. Keep work area clean and organized. Other duties as assigned. Job Requirements Experience with soldering surface mount and through-hole components. Experience in inspecting surface mount and through-hole solder per IPC-A-610 workmanship requirements. Good working knowledge of ESD and IPC-A-610 workmanship requirements. The ability to read and comprehend process documentation including Bills of Materials and assembly drawings. Component identification ability required. Candidates should be very organized. Candidates should have the ability to carry out detailed written or verbal instructions. Basic knowledge of computers. Ability to work in a “Team” environment. Educational Requirements High School or GED degree. Prior electronics experience preferred. Benefits Enercon Technologies offers a competitive Benefits Package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of the Soldering Specialist position is to solder surface mount and through-hole components onto or into printed circuit boards. Follow written processes and/or rework instructions to complete product through the soldering stage of manufacturing. Solder surface mount components (Fine pitch, SOIC, etc.). Solder through-hole components. Perform visual inspection of PCB’s for IPC-A-610 workmanship requirements. Maintain appropriate work related paperwork. Move material/product to different operations as required. Follow all established ESD, safety, ergonomic and security policies. Keep work area clean and organized. Other duties as assigned. Job Requirements Experience with soldering surface mount and through-hole components. Experience in inspecting surface mount and through-hole solder per IPC-A-610 workmanship requirements. Good working knowledge of ESD and IPC-A-610 workmanship requirements. The ability to read and comprehend process documentation including Bills of Materials and assembly drawings. Component identification ability required. Candidates should be very organized. Candidates should have the ability to carry out detailed written or verbal instructions. Basic knowledge of computers. Ability to work in a “Team” environment. Educational Requirements High School or GED degree. Prior electronics experience preferred. Benefits Enercon Technologies offers a competitive Benefits Package.
Enercon Technologies
Nov 16, 2018
Full time
Enercon designs and manufactures embedded systems for a diverse array of customers spanning from industrial, medical, automotive and military markets. We are looking for a talented self-directed Software Test Engineer to join our development team. The qualified candidate will have experience, preferably medical device experience, developing product test plans that conform to regulatory requirements, writing automated unit test scripts, providing a test strategy, and test reports throughout the product development process. Job Requirements Proven experience developing test procedures and scripts in manual test environments. Experience developing automated test scripts, desired. Experience with creating tests for complex embedded systems both software and hardware. Proven experience with manual test execution including troubleshooting. Experience with automated test execution, desired. Knowledge of Python and shell scripting on Windows and Linux platforms. Familiarity with Linux, C/C++, and LabVIEW desired. Unit testing, integration testing, regression testing (automated), and test-driven development experience. Experience with Configuration Management principles and tools. Experience with issue tracking defects, defect logging, tracking, analysis, and validation. Experience documenting and validating design and development tools used in regulated product designs. Experience testing structured and controlled software that conforms to medical and/or automotive processes such as IEC 62304 and ISO 26262. Additional Skills: Experience building and maintaining a test script harness and library to facilitate making the product test design process more efficient. Experience using an oscilloscope or logic analyzer, etc. for low level system testing, would be a plus. Experience managing source code through a source control system, preferably Git. Educational Requirements A minimum of a Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related degree is required for this position Minimum of 5 years testing software, at least 3 years testing software for embedded systems, preferably medical devices. Benefits Enercon Technologies offers a competitive Benefits Package.
Enercon Technologies
Nov 16, 2018
Full time
The primary responsibility of this position is to maintain and operate the automatic surface mount placement equipment, stencil printer(s) and reflow oven(s) in such a way as to produce quality electronic assemblies while meeting the production schedule in a fast paced environment. Functions & Responsibilities: Maintain and operate the automated SMT manufacturing equipment for the assembly of electronic devices Perform stencil printer set-up, changeover, and clean-up. Assist in the creation of reflow oven profiles. Visually inspect SMT assemblies where required to ensure quality. Capable of using measuring devices as required. Maintain appropriate work related electronic records. Move material/product to different operations as required. Perform area and equipment maintenance and clean-up as required. Follow all established ESD, safety, ergonomic and security policies. Department: Manufacturing Supervisor: Manufacturing Supervisor Job Requirements Previous SMT technician/operator experience a plus. – (Willing to train the right candidate) Ability to work in a team environment. Strong drive for success Results Orientated Interpersonal Skills Good analytical, math and problem-solving skills Basic knowledge of computers Attention to detail Educational Requirements High School graduate or equivalent 1-2 years of recent SMT technician/operator experience a plus, but not required for the right candidate Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to test, troubleshoot, repair and overhaul a variety of electronic products.  The Test Technician accumulates and records electrical test data as required, for each product tested, calibrates and maintains test stations and equipment, may help to develop new test fixtures and general department maintenance.  The Test Technician must comply with all Quality Test processes and procedures. Test products per assigned process Maintain accurate records at all times. Maintain an organized and clean workstation. Ensure that all established ESD, safety, ergonomic and security policies are being followed Job Requirements Ability to work alone and in a “Team” environment. Thorough understanding of Microsoft Office. Good organizational and communication skills. Experience with maintaining and calibrating electronic test equipment Perform in-process and or final assembly tests. Educational Requirements Technical certification or appropriate experience. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to test, troubleshoot, repair and overhaul a variety of electronic products.  The Test Technician accumulates and records electrical test data as required, for each product tested, calibrates and maintains test stations and equipment, may help to develop new test fixtures and general department maintenance.  The Test Technician must comply with all Quality Test processes and procedures. Test products per assigned process Maintain accurate records at all times. Maintain an organized and clean workstation. Ensure that all established ESD, safety, ergonomic and security policies are being followed Job Requirements Ability to work alone and in a “Team” environment. Thorough understanding of Microsoft Office. Good organizational and communication skills. Experience with maintaining and calibrating electronic test equipment Perform in-process and or final assembly tests. Educational Requirements Technical certification or appropriate experience. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
Responsible for the design of test methodologies for products during development and in production. Functions & Responsibilities   Review test requirements and translate into test procedures for production Identify equipment, tools, and methodologies for addressing product test needs. Verify that test requirements meet product requirement verification needs and will produce quality products. Design and document test fixtures to be used to test products in a production environment. Investigate and diagnose test kit problems and respond to internal and external customer requests for changes and improvements. Provide technical support to production test technicians.     Job Requirements A background in test engineering within a manufacturing environment. Familiar with complex electronic and mechanical devices and able to anticipate potential failure modes and develop means to detect those failures. Programming experience to develop intelligent test fixtures and support software for communications and programming of microprocessor based products. Familiar with SMT technology and standard test techniques for printed circuit boards. Must be a self-starter and possess excellent time management skills. Must be able to work with a minimum of supervision. Must possess good interpersonal skills. Educational Requirements 4 year Bachelor’s Degree in Electrical Engineering discipline and 1-2 yrs of specific experience in testing Experience in a regulated manufacturing environment (ISO/FDA/QS) is highly desirable Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to direct the development and implementation of activities in the assigned production areas to meet all production, quality, and cost objectives goals. This person will prioritizes production schedules based on operator capacity, material availability and equipment availability if required. This person will ensure that all policies and procedures are being administered in a fair, timely and safe manner. This person will be part of the interview process and will develop and evaluate personnel to ensure the most efficient operation in the department. Functions & Responsibilities Provide immediate supervision to a unit or group of employees, (i.e.…assemblers, operators, technicians) assigning tasks, checking work at frequent intervals, monitoring schedules and defining priorities. Perform individual tasks related to the unit or group. Interact daily with subordinates, functional peers and cross functional employees from other departments. This interaction normally involves exchange or presentation of information. Work on issues where analysis of a situation or data requires a review of relevant factors. Exercise judgment within defined procedures and policies to determine appropriate action. Ensure that all established ESD, safety, ergonomic and security policies are being followed. Hire and perform employee evaluations. Prioritize schedules and resources to meet daily requirements. Communicate issues and concerns to upper management. Be pro-active in looking for continuous improvements to the process. Job Requirements Mechanical or electrical knowledge helpful but not required. Ability to work in a “Team” environment. Leadership skills a must. Thorough understanding of Microsoft office. Good organizational and people skills. Educational Requirements College education or equivalent related work experience. Work experience must be from a manufacturing environment. 2-3 years of supervisory experience. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to perform routine assembly operations and set-up of a variety of functions within a product family in various stages of completion.  Follow written processes and possible rework instructions to complete product through several stages of manufacturing. The ability to read and understand verbal or written instructions for Electro-mechanical products. Perform minor set-up of fixtures and equipment. Must be able to use minor measuring devices as required. Maintain appropriate work related paperwork. Move material/product to different operations as required. Follow all established ESD, safety, ergonomic and security policies. Perform area clean-up as required. Job Requirements No specific skill set required. Basic knowledge of computers. Ability to work in a “Team” environment. Educational Requirements High School or GED degree. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to perform routine functions such as packing, counting, sorting, and associated paperwork. Computer skills and familiarity with UPS and FedEx Online are helpful. Good handwriting, spelling and math skills and meticulous attention to detail are required. You must be willing to work quickly, efficiently and flexibly . Follow written processes and possible rework instructions to complete product through several stages of manufacturing. Functions & Responsibilities: Must meet all job requirements of a Manufacturing Specialist 1. Perform mid-range set-ups of fixtures and equipment as required. The ability to use mid-range measuring devices as required. Must be able to perform continuous visual and physical attention to in-process parts and product. To be certified in certain required build processes. Must be involved in required training per job requirements. Job Requirements Ability to work with minimal supervision. Good organizational skills. Educational Requirements High School or equivalent 1-2 years of related work experience. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to perform routine assembly operations and set-up of a variety of functions within a product family in various stages of completion.  Follow written processes and possible rework instructions to complete product through several stages of manufacturing. The ability to read and understand verbal or written instructions for Electro-mechanical products. Perform minor set-up of fixtures and equipment. Must be able to use minor measuring devices as required. Maintain appropriate work related paperwork. Move material/product to different operations as required. Follow all established ESD, safety, ergonomic and security policies. Perform area clean-up as required. Job Requirements No specific skill set required. Basic knowledge of computers. Ability to work in a “Team” environment. Educational Requirements High School or GED degree. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to develop manufacturing processes for electronic and electromechanical assemblies which yield reliable high quality assemblies at the lowest possible cost.  Functions & Responsibilities Develop and implement manufacturing process technologies, methods and techniques to assist and promote the building of reliable, high quality assemblies at the lowest possible cost. Provide active consultation to new product development teams regarding manufacturing capabilities, techniques and issues related to design for manufacturability (DFM) and test (DFT). Assist in the preparation of new product cost estimates. Implement new equipment and new processes – Responsible for identifying, specifying, validating, documenting, implementing and training. Design production equipment and fixtures to aid in the assembly of product while improving operator safety/comfort, reducing labor and improving quality. Provide technical training in manufacturing techniques, methods and processes to manufacturing associates. Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers. Collect, record, and present data. Investigate and diagnose product manufacturing issues and respond to internal and external customer requests for changes and improvements. Coordinate the implementation of product design changes. Ensure projects are completed on time. Job Requirements ·         Self-starter and a strong problem solver. ·         Desire to work as a member of a team. ·         Comfortable in a fast paced , dynamic environment. ·         Excellent organization and decision making skills. ·         High level of energy and enthusiasm. ·         Strong software abilities: MS Office – proficiency necessary. Experience with Manufacturing Execution Systems, Solidworks, Autocad and MS Project a plus. Educational Requirements ·         B.S. or equivalent in Electrical, Mechanical or Industrial Engineering or Industrial Technology. ·         1-3 years of related of work experience. ·         Experience with printed circuit board assembly and test highly desirable Experience implementing lean manufacturing and/or six sigma desirable Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to develop manufacturing processes for electronic assemblies which yield reliable high quality assemblies at the lowest possible cost. Functions & Responsibilities: Develop and implement manufacturing process technologies, methods and techniques to assist and promote the building of reliable, high quality PCB assemblies at the lowest possible cost. Provide active consultation to new product development teams regarding manufacturing capabilities, techniques and issues related to design for manufacturability (DFM) and test (DFT). Assist in the preparation of new product cost estimates for Printed Circuit Boards. Implement new equipment and new processes – Responsible for identifying, specifying, validating, documenting, implementing and training. Design production equipment and fixtures to aid in the assembly of product while improving operator safety/comfort, reducing labor and improving quality. Provide technical training in manufacturing techniques, methods and processes to manufacturing associates. Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers. Collect, record, and present data. Investigate and diagnose product manufacturing issues and respond to internal and external customer requests for changes and improvements. Coordinate the implementation of product design changes. Ensure projects are completed on time. Job Requirements Self-starter and a strong problem solver. Desire to work as a member of a team. Comfortable in a fast paced , dynamic environment. Excellent organization and decision making skills. High level of energy and enthusiasm. Understanding of computer and machine programming and I/O logic. Ability to troubleshoot machine control problems and perform system tests. Strong software abilities: MS Office – proficiency necessary. Experience with Manufacturing Execution Systems, Solidworks, Autocad and MS Project a plus. Educational Requirements B.S. in Electrical Engineering or Electrical Engineering Technology preferred, Mechanical or Industrial also considered. 1-3 years of related of work experience with Surface Mount Technology (SMT) production lines. Experience with printed circuit board assembly (through hole and surface mount technology) and test highly desirable. Familiarity with IPC J-STD-001 and/or other IPC standards. Experience implementing lean manufacturing and/or six sigma desirable. Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to manage the development and improvement of the product test processes and procedures. The Manager of Process Test Engineering coordinates the development of test equipment and processes oriented toward improving quality and reliability, while lowering total costs. Functions & Responsibilities Directs and coordinates the test engineering group activities in the design, development, implementation and improvement of systems, processes and procedures. Plans and establishes test engineering projects and follows up performance against estimates. Initiates testing cost reduction proposals, compiles appropriate information, makes recommendations for action, and checks on results obtained. Manages the implementation of test changes. Oversees the implementation of new test equipment and new test processes including the identification, source selection, validation, manufacturing implementation and training. Ensures the active consultation with new product development teams regarding testing capabilities and issues related to designing for test . Assists in the preparation of new product cost estimates specific to test . Directs the technical training in testing techniques, methods and processes provided to manufacturing associates. Actively maintains knowledge of new testing technologies, methods and techniques. Administers group personnel functions such as recruiting, hiring, and performance reviews. Ensures compliance of company policies, procedures, and objectives regarding processes, initiatives, and projects. Job Requirements Excellent software abilities: MS Office –proficiency necessary. Ability to manage self directed on a day to day basis. Ability to work in environments experiencing routine and rapid change. Excellent organization and decision making skills. High level of energy and enthusiasm. Educational Requirements B.S. or equivalent in Electrical Engineering. At least 3 years of related of work experience required. At least one year of demonstrated ability to lead direct reports Experience with printed circuit board assembly and test highly desirable Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
The primary role of this position is to manage the development and improvement of the product test processes and procedures. The Manager of Process Test Engineering coordinates the development of test equipment and processes oriented toward improving quality and reliability, while lowering total costs. Functions & Responsibilities Directs and coordinates the test engineering group activities in the design, development, implementation and improvement of systems, processes and procedures. Plans and establishes test engineering projects and follows up performance against estimates. Initiates testing cost reduction proposals, compiles appropriate information, makes recommendations for action, and checks on results obtained. Manages the implementation of test changes. Oversees the implementation of new test equipment and new test processes including the identification, source selection, validation, manufacturing implementation and training. Ensures the active consultation with new product development teams regarding testing capabilities and issues related to designing for test . Assists in the preparation of new product cost estimates specific to test . Directs the technical training in testing techniques, methods and processes provided to manufacturing associates. Actively maintains knowledge of new testing technologies, methods and techniques. Administers group personnel functions such as recruiting, hiring, and performance reviews. Ensures compliance of company policies, procedures, and objectives regarding processes, initiatives, and projects. Job Requirements Excellent software abilities: MS Office –proficiency necessary. Ability to manage self directed on a day to day basis. Ability to work in environments experiencing routine and rapid change. Excellent organization and decision making skills. High level of energy and enthusiasm. Educational Requirements B.S. or equivalent in Electrical Engineering. At least 3 years of related of work experience required. At least one year of demonstrated ability to lead direct reports Experience with printed circuit board assembly and test highly desirable Benefits Enercon Technologies offers a competitive benefits package.
Enercon Technologies
Nov 16, 2018
Full time
An Embedded Firmware Engineer is responsible for developing software for a diverse array of products and applications in the industrial, medical, automotive and military markets. Enercon is looking for a self-directed Software Engineer, capable of working independently or as part of a team, prepared to take on the challenge of working on dynamic and diverse projects. The right candidate will have at least 3 years of experience working on embedded products using industry standard best practices for software development. Job Requirements Excellent C/C++ for embedded systems development is a must. Programming for both Bare Metal and multi-threaded RTOS systems. In-depth knowledge of ARM and PIC processors.  DSP and FPGA experience a plus. Strong experience developing for real-time systems, low-level drivers and hardware interfaces. Experience with the following communication interfaces:  I2C, SPI, CAN, USB.  Experience with TCP/IP, WiFi, Bluetooth a plus. Knowledge and experience with lab equipment:  Oscilloscopes, power supplies, multi-meters. Experience managing source code through a Git source control system. Excellent written and oral communication skills. Good time-management skills with the ability to multi-task and work on multiple projects. Demonstrated ability to follow Software Development Plan guidance and processes so as to generate code, technical software descriptions, and other artifacts as required by the software development processes. Ability to work cooperatively with other developers, hardware engineers and testers in the development of the system. Educational Requirements A minimum of a Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science or related degree is required for this position Minimum of 3 years developing software for embedded systems. Benefits Enercon Technologies offers a competitive Benefits Package